

|
 |
Shopping with Appliance Parts Pros.com is safe! We guarantee that every purchase
you make with us is safe and secure. Read our
privacy and security policy.
Appliance Parts Pros.com does not sell or give out your information to anyone
|
Details
|
Thank you- very easy process for ordering. It's appreciated very much.
Regina H.
Adrian, Michigan
|
|
|
|
Questions & Answers

Hello Wayne. Check and see if the bottom of the unit has water in it where you replaced the pump. If so, it will need to be completely dry, or the float will raise up and turn the drain pump AP3996662 on to prevent flooding.
Answered by AppliancePartsPros.com

Hello Wayne. According to the manufacture, you will need to order the adapter AP5323611 for the pump to work properly.
Answered by AppliancePartsPros.com

Hello Rodney. No it should spin, but not freely you should feel some resistance on the AP3996662 you can check this with a 110 a/c test cord, you can take an old 110 cord off of something and put two spade connectors on it , plug them on to the two spades coming off the pump and see if it spins just be careful, I would check the drain hose at the connections where it hooks up under the sink and where it comes out of the pump. It is always good to run some AP4308827 thru the unit periodically.Thank you and good luck !
Answered by AppliancePartsPros.com

Hi Bob. Check the drain pump to see if the impeller is not either damaged or is spinning loose on the shaft. Drain pump part # AP3996662. Thank You.
Answered by AppliancePartsPros.com
Asked by Bob for Model Shx43
Hello Bob. Yes by the information you have given, you will need to replace the AP3996662, first I would check your drain hose where it connects under the sink, for clogs, we also have some good cleaner AP4308827 that will help you maintain all the inner working parts of your unit , Thank you and good luck!
Answered by AppliancePartsPros.com

Hello Chip. AP2806666 is the drain pump assembly. Based on the information you provided, it sounds like the circulation pump AP2826384 is bad and will need to be replaced. Hope this helps.
Answered by AppliancePartsPros.com

Hello Allan. Remove toe kick, then pull up terminal cover and disconnect wires. For easier access, remove base cover 1st.
To remove pump AP3996662, push latch (on circular collar) & rotate pump clockwise (cw). To install new pump, insert @ 2:00 position & rotate counterclockwise (ccw).
Clean water & debris from base, then check float operation.
Connect wires, then install base cover & toe kick. Hope this helps.
Answered by AppliancePartsPros.com
|
Cross Reference and Model Information
|
|
Part Number 642239 (AP3996662) replaces 184178.
|
Made by BOSCH. BOSCH brands include Bosch, Thermador, Gaggenau, and others.
|
| |
Popular Searches
|