The Fast and Easy way to find parts for home appliances. Over 1,000,000 parts. 200,000 part photos and diagrams. Real help and the best price.

Shopping with Appliance Parts Pros.com is safe! We guarantee that every purchase you make with us is safe and secure. Read our privacy and security policy. Appliance Parts Pros.com does not sell or give out your information to anyone Details Thank you for the supper fast shipping. Jiri S. San Mateo, California

Agitator Repair Kit Appliance Parts > Washer Parts > Agitator Repair Kit   Different views available: Medium Cam Agitator Repair Kit - Includes 4 agitator dogs, a medium length cam, a cap seal, a washer for the agitator bolt and a thrust washer. Is your upper agitator not working properly? Get this kit. Whirlpool recommends using a small amount of grease with this kit (if no grease is present on the old thrust washer). For the Whirlpool agitator grease order AP3098553. For the long cam order AP3094520. For the short cam orderAP3094543. Item Number: AP3138838 Manufacturer's Number: 285811 Made by Whirlpool Original Whirlpool Part Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. Whirlpool also makes various appliance models for Sears / Kenmore. Our Price: $9.79 Reg. retail: $21.61 You Save: $11.82 In Stock Order now and it will ship Today Quantity Questions & Answers For WHIRLPOOL Medium Cam Agitator Repair Kit (Part Number: AP3138838) Latest Questions | Highest Rated Expand All 1 Answer Hi, I just got a washer off the internet from someone. The washer works fine. It spin's and doesn't shake or bounce around, but I can't put to many clothes in it because if I do, the top part comes off and when I take the lid off the top part there is nothing holding the two agitator pieces together. Theres no cap. All I see is a bolt on the lower piece the top piece comes right off by hand. It spin's and works smooth so I don't know if I need a bolt or a cap to keep them together. Please help! This is my first washer and even though it's not brand new it works good. It's a whirlpool design. Thank you! Asked by Jennie for Model LA5550XPW7 Hello Jennie, From you description, the hole in the bottom of the lint filter AP2906586 is widened so the bolt comes through it. The cap, as you stated is missing, is part number AP3019861. These sound like all you need to get you fixed up unless the lint filter was incorrectly installed to begin with. Try taking the bolt out and dropping it into the lint filter and see if the bolt will hold it in place. If so all you need is the cap. Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer I've gotten down to the stud and seal, but when I use the socket wrench to remove it, it won't unscrew. It seems to temporarily loosen and then tighten again, no matter which way I've tried to turn it. Could it be stripped out? Which way do I turn it? Will it hurt to put a lot of force into it? Asked by Mercy Mercy, Presumably, you mean the agitator bolt AP3046456 . You would use a 7/16 in socket and wrench with an extension, and turn the bolt head counter clockwise.Based on your description, it sounds like it is "stripped" You may want to try using a pair of "VISE GRIP" pliers, lock them onto the bolt head and pullup and turn at the same time, until you get past the "stripped threads of the bolt, then continue with the socket wrench. Otherwise, you'll need to drill or cut the bolt and remove the remainder, after you get the agitator out. Good Luck and Thanks Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer I got the cap off. It now has another cap that does not unscrew and that I cannot pull out. The plastic part has an approximately 1/4 inch "strip" going across. Is that a pull out or screw out part? Thank you Asked by Hanne for Model LLR8322BWO Hello Hanne, The second cap pulls straight out. I grab the "strip" with pliers and pull it straight out. Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer The agitation is "grinding" with large loads. (Not constantly) small loads don't "grind, but you can see that the agitator is moving unevenly. I am pretty sure I need the agitator kit. Not sure whether medium or long kit yet :) My question is: Does the grinding noise signify an additional problem? Also the cap seems solidly "stuck" So far have not been able to remove it. Thank you Asked by Hanne for Model LLR8322BWO Hello Hanne. You may need to use a flat blade putty or butter knife to go between the agitator cap AP3019861 and the agitator to remove it. It just pops off the agitator. Then check and see if the cams are making the grinding noise by turning the agitator by hand. If so, AP3138838 is the correct kit for the unit. Hope this helps. Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer I have a Kenmore washer modle number 110.26842692, what agitator kit do I need? Asked by Benny for Model 110.26842692- Kenmore Benny, you will need the long cam agitator repair kit part number AP3094520. Thanks! Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No Highest Rated Questions Expand All 1 Answer how do i tell if i have medium cam Asked by Guest The cam is the white "tower" looking part in the photo. Medium cam kit (this page) is the most popular and is about 2-1/4 inches. There is also a long cam agitator kit AP3094520 and short cam agitator kit AP3094543. You can measure the old cam or enter your model number at http://www.appliancepartspros.com and we'll tell you exactly which one you need. Answered by AppliancePartsPros.com   4 people found this answer useful. Did you find this answer useful?       Yes    No 1 Answer I got the top opened and removed the bolt which was down about 9". However, I am not able to remove anything else. How do I unlock/remove the rest of these parts. Asked by Guest Hello. Removing the agitator: 1. Raise the lid. 2. Pull the liquid fabric softener dispenser up (if used), to remove it from the top of the agitator. 3. Insert a small screwdriver in the slot between the agitator and cap and pry the cap off the agitator. 4. Reach in and remove the barrier cap and gasket by pulling up. 5. Using a socket wrench (with extension) or nutdriver, remove the stud and seal which holds the agitator to the shaft. 6. Remove the agitator mover by pulling this up off the agitator. 7. Turn this agitator mover over so the camp and clutch dogs (4 pieces) slide out. 8. Carefully remove the round rubber seal off the top of the agitator. 9. Carefully remove the agitator by lifting straight up. 10. Inspect the agitator shaft for worn grooves or rust. If the shaft is bad (rare), either call an appliance repair company to repair this or replace the complete gearcase yourself. Installing the agitator and cam kit AP3138838: 1. Place the new agitator on the shaft. 2. Rotate the agitator until the grooves in the agitator match the grooves on the shaft, and push the agitator down. 3. Place the new round rubber seal in the groove on top of the agitator. 4. Hold the new camp upside down. 5. Place the small round part of the new clutch dog (4 pieces) in the slot on the cam. 6. Do the same thing to the other three (3) clutch dogs. 7. Turn the agitator mover over and carefully insert the cam and dogs, up into the agitator mover until the camp stops. 8. Carefully turn the agitator mover upright. Note: The cam has a cutout and tabs across from each other. The agitator has tabs across from each other. These must line up in order for the came to slide down on the agitator. 9. Place the agitator mover, cam, and dogs over the agitator while lining up the tabs. Note: If the dog(s) falls out of the slots(s) in the cam you will have to repeat steps 4-9. 10. Push the cam down until the tabs snap together. 11. Push the new auger agitator on the shaft. 12. Rotate the agitator until the grooves in the agitator match the grooves on the shaft, and push the agitator down. 13. Using the socket wrench (with an extension) or nutdriver, insert the stud and seal through the agitator, into the shaft, and tighten. 14. Be sure the round gasket is in the groove in the barrier cap. Note: The barrier cap must be pushed down past the holes in the mover, so the liquid from the dispenser can flow out of the holes. 15. Push the barrier cap and gasket all the way down into the agitator mover. 16. Press down on the liquid fabric softener dispenser or cap, which ever you have, until it is all the way down on the agitator. 17. Close the lid. Hope this helps. Answered by AppliancePartsPros.com   3 people found this answer useful. Did you find this answer useful?       Yes    No 1 Answer When I load my washer with a large load the agitator won't turn. Why? Asked by Guest Hello, If the cam kit AP3138838 is bad, it will keep the machine from agitating properly. Hope this helps. Answered by AppliancePartsPros.com   2 people found this answer useful. Did you find this answer useful?       Yes    No 1 Answer My washer has a medium cam. The only parts in the cam that are broken are the drive cogs or "dogs" Is it possible to purchase just the broken parts, and if so what is the price? Thank you Asked by Wilbert C. F. for Model KitchenAid Clothes Washer, KAWS750GQ1 Hello Wilbert. Here is the part number for the dogs AP3119063. Hope this helps. Answered by AppliancePartsPros.com   1 person found this answer useful. Did you find this answer useful?       Yes    No 1 Answer I have the stackable frigadire washer and dryer combo, The agitator will not agitate everythin else works, it feels like the shaft is broken, is that possible and if so how do I replace it? Asked by Damon Hello Damon. We will need your model number to help you with this. Thanks. Answered by AppliancePartsPros.com   1 person found this answer useful. Did you find this answer useful?       Yes    No Read all 123 Questions & Answers about Medium Cam Agitator Repair Kit by Whirlpool Back to top Cross Reference and Model Information Part Number 285811 (AP3138838) replaces 3363663, 3351001, 3347410, 285746. Made by Whirlpool. Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. Whirlpool also makes various appliance models for Sears / Kenmore. Part Number WHIRLPOOL 285811 (AP3138838) - Medium cam agitator repair kit is used with the following appliance models:   Related Info whirlpool 285811 agitator repair kit fsp 285811 agitator 285811 whirlpool agitator cam repair kit 285811 285746 3351001 whirlpool 285811 whirlpool agitator kit 285811 agitator cam kit 285811 Popular Searches