The Fast and Easy way to find parts for home appliances. Over 1,000,000 parts. 200,000 part photos and diagrams. Real help and the best price.

Shopping with Appliance Parts Pros.com is safe! We guarantee that every purchase you make with us is safe and secure. Read our privacy and security policy. Appliance Parts Pros.com does not sell or give out your information to anyone Details The knobs arrived late Monday. Thank you very much for your assistance. I had been looking for them for months!! Sharon T. Yorba Linda, California

Water Pumps Appliance Parts > Washer Parts > Water Pumps   Different views available: Whirlpool Direct Drive Washer Pump - Genuine Whirlpool part. One large port and one small port. Fits most Whirlpool and Kenmore direct drive washers (no belt models). Related item: Motor coupling AP3963893. Item Number: AP2907492 Manufacturer's Number: 3363394 Made by Whirlpool Original Whirlpool Part Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. Whirlpool also makes various appliance models for Sears / Kenmore. Our Price: $30.66 Reg. retail: $69.65 You Save: $38.99 In Stock Order now and it will ship Today Quantity Questions & Answers For WHIRLPOOL Whirlpool Direct Drive Washer Pump (Part Number: AP2907492) Latest Questions | Highest Rated Expand All 1 Answer Washer fills up w/water in rinse cycle and then shuts off. Will not spin or dispose of water. Asked by Al for Model RAX7245KQ0 Hello Al. You will need to check and see if the lid switch AP3100003 is broke or bad on the unit. If so, this will cause the unit not to drain or spin out. You can test this with a multi-meter AP3873826. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer Water enters machine and drains out? No leaking on floor. Was able to get it to fill on delicate cycle? Asked by Ken for Model ras6233kq2 Hello Ken. It sounds like the unit is siphoning out the water in the unit. Check and make sure there is only 6" of drain hose in the drain pipe. Also, make sure the drain pipe is 36" off the floor in height. You will need to check and make sure the drain hose has an air gap going into the drain pipe. If it is air tight, it will siphon. Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer My washer wont fill up. Can this be the pump? Asked by Rose Ann for Model rax4232kqo type 107 Hello Rose Ann. No, test and see if there is power coming to the water valve AP3094541 on the unit. If so, make sure the screens are not clogged. If the screens are good, and there is power there, but no water, replace the water valve on the unit. You can test this with a multi-meter AP3873826. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer During the water fill stage (either during wash or rinse) the tub doesn't fill. Water "in" appears to work just fine for the setting, but water exits out the drain hose - as if a drain value is stuck open. Can you help? (PS: I replaced the timer control with a new one - no difference). Thanks. Asked by Steve for Model lsn2000pw4 Hi Steve. This is called a siphon-lock. Look at the drain hose and pull it out of the standpipe. Make sure there is a gap in between the drain hose and the standpipe opening. It needs proper air also while it is draining. You may need to extend the standpipe higher then the top of the washer. Use a Y-pipe and a anti-siphon cap on the top of it to allow air to be drawn in while the drain pipe is in the side Y-portion. Use drain-o in the standpipe while doing this. Your drain hose is only needed to be inserted 6 - 8" only. Thank You. Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No 1 Answer We have water in between the outer tub and inner tub. We determined it needs a new pump; however, when we take the old pump off will the water come out on the floor or will it stay in there and will come out after we put the new pump on and we put it on spin? Guess I want to know if we need a pail there when we take the old pump off. Thank you! Asked by Marilyn T. for Model LSC9000PW0 Hello Marilyn. Any water inside the tub assembly will come out when the old pump AP2907492 is removed. Answered by AppliancePartsPros.com Did you find this answer useful?       Yes    No Highest Rated Questions Expand All 1 Answer My washer just started leaking from the bottom this weekend. We ran a cycle and lifted the machine and saw water coming directly out of the pump part #AP2907492, but my question is, How do I know that this is the part that needs to be replaced verses the hoses? If I see the water coming directly from this part can I be confident in the assumption that this is the part to replace then? Asked by Shea M. for Model LSB6300LW3 Hello Shea. If you see water coming from the pump, then that is the part you will need. If it were a hose, the water would come from there. Hope this helps. Answered by AppliancePartsPros.com   2 people found this answer useful. Did you find this answer useful?       Yes    No 1 Answer how is the direct drive washerpump secured ( attached ) to the motor ? Asked by Guest Hello, This answer was located on our Repair Forum, this is a free service in which technicians will assist with answering repair questions for our customers. Please use this link to assist in your repair: http://forum.appliancepartspros.com/washer-repair/171369-washing-machine-leaking.html. Hope this helps! Answered by AppliancePartsPros.com   2 people found this answer useful. Did you find this answer useful?       Yes    No 1 Answer Machine fills and agitates for wash cycle. Stops at drain and spin. Whaat would cause this??? Asked by Kevin for Model lsn1000kqo Hello Kevin. You will need to check the lid switch AP3100003 and see if it is broke or bad. Hope this helps. Answered by AppliancePartsPros.com   1 person found this answer useful. Did you find this answer useful?       Yes    No 1 Answer Water drains on floor between wash and spin before rinse. The washer has gone thru its normal wash cycle with no problem. There is a large black spot on the floor beneath the washer as well. What is the possible problem here? Asked by Linda for Model LLR61441BQ1 Hello Linda. You will need to look and see where the water is leaking from. Check the pump and all the hoses. Also check the motor coupling and see if it worn, causing the black spot on the floor. Hope this helps. Answered by AppliancePartsPros.com   1 person found this answer useful. Did you find this answer useful?       Yes    No 1 Answer I took my pump out and a brass pin fell out and I don't know where the pin hooks back in it. Can you please help me? Asked by Ashley for Model 110.27812690 Hello Ashley. There are no brass pins for the pump. Hope this helps. Answered by AppliancePartsPros.com   1 person found this answer useful. Did you find this answer useful?       Yes    No Read all 72 Questions & Answers about Whirlpool Direct Drive Washer Pump by Whirlpool Back to top Cross Reference and Model Information Part Number 3363394 (AP2907492) replaces 3363394, 8235, 64076, 63347, 62516, 62516, 3352492, 3348215, 3348015, 3348014. Made by Whirlpool. Whirlpool brands include Whirlpool, Maytag, KitchenAid, Jenn-Air, Amana, Magic Chef, Admiral, Norge, Roper, and others. Whirlpool also makes various appliance models for Sears / Kenmore. Part Number WHIRLPOOL 3363394 (AP2907492) - Whirlpool direct drive washer pump is used with the following appliance models:   Popular Searches