I have had this machine for about 12 yrs, after the original warrantee expired the machine stopped cycling. Repairman came and changed the control module and said it was a common problem. A few years later I had the same problem so I ordered the module thru your company and the problem was solved. Last week the machine would go on (pump water out) but would not fill with water and would not shut down, so I ordered another module thru you and after I installed it it appeared to work ( pump out, refilled, the soap door opened but went no further. Also when I hit the two buttons to reset to CL the machine would not shut off. You are resending another module because I think the new one might be defective.
ANSWER Hello Joe. If you have issues with the new module, you will need to check for power to the water valve. If it is there, and no fill, replace the valve on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Saturday, February 23, 2013