How do I replace the water valve? Thank you.
ANSWER Hello Yvette. Here are the manufacture instructions. Hope this helps.
Disassembly To remove water valve: Tools needed: T20 Torx screwdriver & pliers. 1.Remove two (2) T-20 Torx screws from toe kick and tilt toe kick out from under dishwasher. 2.Remove base insulation (on models with insulation). 3.Move sump inlet hose away from water valve (without disconnecting it). 4.Disconnect wires from water valve, including ground wire. 5.Remove two (2) T-20 Torx screws from water valve. 6.Pull valve out from dishwasher and disconnect water hose from rear of valve. Remove any water from sump & base.
Answered by AppliancePartsPros.com | Friday, April 08, 2011