I wrote you last night about my compressor. I took the reading on start coil, 7.3 ohms. and the run coil reading was 4.2 ohms. The capacitor and relay are new. The last resouce I did was, I removed the temp. control cover and jumped both ( freezer and fridge)temp. controls. The compressor runs okay with 1.4 amps load. Tried to hook up the temp controls for the fridge and freezer one after the other and the compressor is tripping. Put back the jumpers on both temp controls, the compressor runs okay. Would it be possible the freezer and the fridge temp controls gone bad at the same time? I have not remove both temp. controls yet. Pls. advise
ANSWER Hello Jose. It is possible that both controls went out at the same time, but lets try something first to see. Hook the freezer thermostat 5304421067 and leave the refrigerator thermostat jumped. See if the compressor trips. If not, jump the freezer and hook up the refrigerator thermostat 241586503. If it still does not trip, you may have other issues than the thermostats. It could be the ADC 5303918476 giving you the problems your having. Hope this helps.
Answered by AppliancePartsPros.com | Friday, September 23, 2011