Okay. So I replaced the control a second time and the vent door is still open during every cycle except the dry cyle. As I mentioned before I have also replaced the vent switch, blower and gasket. When I run the service test this is the result: 07 - Sensing/Washing, 06 - Sensing/Washing, 05 Washing, 04 - Washing, 03 - Washing, 02 - Washing, 01 - Washing, 01 - Dry, Blank - Dry and then when test completes the Rinsing/Clean lights are on. So it appears it is not cycling for rinse.
ANSWER Hello Kevin. It sounds like there is a wiring issue with the unit. There should not be 120 volts coming to the actuator during the wash cycle, and not there during the drying cycle. It sounds like the wiring is crossed and is feeding the unit in reverse of what it should be. You will need to check the wiring on the unit.
Answered by AppliancePartsPros.com | Monday, July 09, 2012