I have never used the dishwasher, but I noticed the controls stopped lighting up. Upon investigation I found that the ground wire had not been properly installed. Any idea what could have blown out? Is it a part I can replace or should I scrap the whole dishwasher? Thanks.
ANSWER Hello Josh. Test for power coming to the control board 154783201. If there is power there, but none coming out, replace the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, March 02, 2012