I asked the question below a few weeks ago. I purchased the part you suggested and after it was installed, the fridge still has the same problem. HELP?
My Electrolux/Frigidaire Side By Side Fridge started beeping constantly. I unplugged it for about 5 minutes, plugged it back in and reset it with the reset button on the control panel. This worked great for 5 minutes, then it started beeping again. Repeated reset process with no luck. Any time I plug it in, it starts beeping immediately (about 1-2 beeps per second). The door switch is working on both the fridge and freezer doors. Is it the contol board (240596701) that has failed?
Asked by Chevyscanfly for Model GHSC239DW0
Chevyscanfly, If your sure, both the refrigerator and the freezer door switches are working properly, and there are no loose wires or connections at the board itself, then yes, the genesis control board will need to be checked or replaced AP4362602.
Answered by AppliancePartsPros.com
Chevyscanfly for Model Number GHSC239DW0
ANSWER Hello Chevyscanfly. In the answer provided, did you check the door switches and the wiring harness? If not, these will cause the issue and should have been checked before the board was replaced. Check both door switches and also do a continuity test on the wiring harness. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, August 03, 2012