Dryer runs but does not dry, have replaced the element, vent not blocked, I believe heater relay not coming on but not sure if there is some other issue with thermostat or limiter. Anyway to verify this or is it just control board issue? Ideas?
You will want to check the high limit thermostat and the thermal fuse to make sure that they have continuity. If they do not have continuity then they need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, May 17, 2013