24/7 Customer Support

CHECKOUT
Items in Cart:
Total
$0.00

Customer Questions and Answers for Control Board by Frigidaire

  1. Our Price $177.48
    Compare At $211.20
    You Save $33.72
     
    • Part Number: AP3851146
    • MFG Part Number: 134523200
    • Made by: Frigidaire
    Add to Cart

Questions & Answers

For Frigidaire Control Board (Part Number: AP3851146)

Answer or Comment

View all Questions

Our dryer beeps several times and we get an err E68 code also it gets very hot on the top towards the back. Thanks

Doug for Model Number GLEQ2152ES1

ANSWER Hello Doug, The E-68 Fault Code is a stuck key fault code. If jiggling all of the buttons doesn't clear it, the user interface 134523200 will have to be replaced to clear the code and return the unit to normal operation. The procedure is as follows: Removing the top panel: 1. The top panel is held in place in the front by (3) plastic tabs on the console (2) metal tabs (one on each side) 2. Remove the (2) screws, slide the top back about 1/2 inch and lift the top off. Removing the console: 1. Disconnect the dryer from electrical supply and remove the top panel. 2. Remove the (4) screws, (2)on each side, holding the console to the front panel and roll the console forward. Removing the control board: 1. Disconnect the dryer from electrical supply and remove the top panel. 2. Remove the console. 3. Remove the (5) screws holding the control board to the console and lift to control off. Removing the control board’s rear cover: 1.Disconnect dryer from the electrical supply and remove the control board. 2.Release the two locking tabs and roll the cover off of the control. Removing the interface board: 1. Disconnect dryer from the electrical supply and remove the control board. 2. With the control board removed, the interface board will lift out. 

Answered by AppliancePartsPros.com   |   Thursday, August 02, 2012

We are Safe, Secure, Dependable and Trusted
  • BizRate.com Customer Certified Site - Click to Verify