I have a FAQG7077KWO Gas Dryer. A couple days ago the dryer vent was very clogged and after cleaning the path and restarting the dryer, the burner no longer ignites. Whether or not the 2 are related, I'm not sure. I followed the directions on the dryer tech data sheet, and found the following error codes. E5B, and 011. Following the solutions for E5B, I measured the reading on RLY2 and got a 0 reading. The next step suggested disconnecting the NO and measuring the drop between CO and the neutral resulted a reading of 49!? I followed the red and black lines down to the Limiter and Thermostat on the Gas Dryer Tube. I am getting continuity on the Thermostat, but not the limiter. The ignitor shows continuity, and there is never any flame, so that should rule out the Coils and Flame Sensor. This leads me to believe it is the limiter that needs to be replaced. I would like to order that part, and get to work, but I want to get a second opinion before I swap it out, as it is pretty deep in there, and a pain to get to.
The limiter should have continuity through it. If you do not have continuity then you would want to replace the limiter 137539200.
Answered by AppliancePartsPros.com | Wednesday, February 27, 2013