I have a affinity front loader washing machine the machine comes on but when u push the button to start no water comes into the drum the drum turnes but no water. I had the valve checked its not bad. I've cleaned the boot out no clogging. Could it be the control board?
ANSWER Hello Jamie. You will need to test for power going to the water valve. If there is no power there and the unit is on, then the board or the wiring harness is bad and will need to be replaced. If there is power and no water, then you will order and replace the valve on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, April 23, 2013