Recently my tub doesnt drain the water out. Dishes appear to be getting cleaned fine but the tub is left full of water. I took out the spinner arm and the little screen and checked in there and all appears ok. I also took off the face cover underneath and checked the hoses and they dont seem to be clogged. I ran a short "rinse only" cycle and kept checking under to see if this motor was spinning or running and never saw it turn on. Is this my problem in a bad pump assembly?
ANSWER Hello Ron. You will need to test and see if your getting power to the pump. If so, and the pump is not running, you will need to replace the pump. Hope this helps.
Answered by AppliancePartsPros.com | Tuesday, April 05, 2011