Need to know how I would determine if element is bad or infinite switch is bad....left front element and right rear element will not heat.
ANSWER Hello Carolyn. You need to test the elements for continuity. They should read closed. Also, you can remove the elements and look for brakes or burnt spots on the ribbon cable in the element. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, September 11, 2013