Note: This question is for the older version of this part, but we thought you might still find it helpful
For Latch Assy Part Number: AP3867063, how can I test to confirm it is working? There are 4 points I can use a multimeter to test for closed loop.
ANSWER Hello Mict. Test each micro-switch. With the latch A00099902 attached to the strike, the switches should read closed. If not, you will need to replace the latch assembly. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, October 25, 2011