I have the same issue as Jarod above. I have removed the 4 front brass screws under the control panel and also the 4 black sheet metal screws under thet at the vent and still no panel removal. there are no screws on the ends of the control panel on the end. This unit was mftrd. in Sept 2006 Please help. The reason for this is I have the front right element center part does not work and the front left element does not work at all.
ANSWER Bob, This should help you out. "How to access the control panel : • Remove the screw on each side.• Remove the two screws under
the console.• Pull down the console.• Remove the screw on both side of the console.• To be able to flip over the control panel, remove the screws on both brackets located under the control panel, at the front.•The control panel can now be flipped to allow reach of the
electronic components. How to reach the cooktop • Remove the control panel.• Remove the four screws on the front on the burner box (two on both side).• Pull up on the entire burner box and in order reach the surface elements, just flip over the burner box. • Unscrew the burner box screws from all sides.• Remove the burner box from the glass top.• Remove the retainer bar by applying pressure to the extremity and pulling the anchorage away from the retainer bar in order to free the surface element.• Follow these steps backward in order to re-assemble the cooktop and the control panel." Good Luck and Thanks
Answered by AppliancePartsPros.com | Wednesday, March 28, 2012