My broiler element works,but oven element doesn't heat up at all. All wires are attached element appears to be in good shape. Would I need to replace element or something else?
ANSWER Hello Tim. If the element reads closed for continuity, it is good. If it is open, it is bad. If it is good, you will need to replace the control board 316207511. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, July 19, 2013