I am receiving an F32 error and after hitting cancel or even shutting the power off at the breaker it returns. What is causing this problem? All I can find is a note that says the F32 error is potentially an unseated ribbon to the control panel.
ANSWER Hello Scott,
You should check your oven sensor to make sure that it is good. To do this you would do a resistance check on the sensor. The sensor should ohm out between 500 and 1090 ohms.You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, January 09, 2013