Overflow leaking order water inlet valve, still leaking in the ice tray with the cubes, overflows a little bit then stops. Now I order the ice maker # 5303918277 as instructed by your parts department. Can you please forward me instructions as to how to install the ice maker? I would appreciate it. Thank you for your help in advance.
ANSWER Hi Nannette. Ice maker part #5303918277 comes with instructions. Replacement Ice maker - By Frigidaire. Fits most Frigidaire, Gibson, White Westinghouse and Kelvinator refrigerator models. Cord has four round female connectors, comes with an adapter that will convert it to three round female and one round male connectors. This is a replacement part only and is not used for brand new installations. Remove power. Remove the ice bin. Remove the lower front screw mount. Loosen the 2- top screws. ( Phillips or 1/4" screws). Lift the ice maker off the mounts. Then disconnect the electrical connector. Match the # of terminals compared from the original ice maker. Use the adapter cord if needed. Then reverse installation. Before tightening the mount screws completely, use a level and level the ice maker so cubes will be filled level. Then make sure the bail arm is down. Once the ice maker thermostat is satisfied below 12-14°, then it will allow water valve to fill the ice maker. Thank You.
Answered by AppliancePartsPros.com | Wednesday, June 13, 2012