I replaced the ignitor on my dryer but still is not glowing, replace the wiring too, and no heat yet. What should I do next?
ANSWER Hi Walter. Dryer Gas Coils: Check the coils 279834 and see if they test good. You can test the coils using a multi-meter TJMA-DM1. The two prong coil will read 1,000-1,300 ohms, and the three prong coil will read 1,300-1,400 ohms across prongs 1&2, and 500-600 ohms across prongs 1&3. If this is not it then let us know so we can help further. Thank You.
Answered by AppliancePartsPros.com | Wednesday, June 20, 2012