I just purchased 2 replacement elements for our range. How do we replace?
ANSWER Hi. It will be easier to remove the door first. Then look under the top under the top Lt and Rt corners. Remove the hidden under the corner screws that mount the top to the cavity. Lift up on the glass top and support the top with the top support rod or a piece of wood. Do not damage the insulation on top of the inner cavity. Mark down the wire connections first so they are replaced efficiently. The bottom of the element has numbers that the element screws are mounted to 2 of them. Use a black marker to mark these screws so you use the same on the new elements. This will insure the centering of the burner when replaced under the glass top. There is a bracket running Lt and rt holding the burners to the bottom of the top itself. Release these bracket mount screws to replace the element itself. Look at the wire connections on the element sensor connections so you hook the wires to the same on the new elements. Thank You.
Answered by AppliancePartsPros.com | Monday, October 08, 2012