Water will not go into my washer. I changed the door lock switch and now the machine will run through all cycles but still no water. I replaced the door switch because you had to wiggle the door to make the machine work. I checked the wiring plugs. They can only go in one way.
ANSWER Hello Tony,
I certainly don't want to make you mad, but first check to make sure the water hasn't been turned off. If the water is on, I would check to insure the water valve is getting voltage when it should be filling. If it is, the water inlet valve 131974700. If it isn't getting voltage, I would check to be sure the main control is getting voltage. If it is, then check that the voltage is leaving the main control. If not, change the main control. If so, check the pressure switch. You should find a wiring diagram on the unit either behind the kick panel, or under the main top.
Answered by AppliancePartsPros.com | Wednesday, April 04, 2012