Dishwasher will not cycle thru when I have on Hi Tepm water. What could be the problem?
ANSWER Hello John. Test the heater and thermal cut-off and make sure they read closed for continuity. If both are good, you will need to order and replace the control board in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, December 31, 2012