I received the thermostat I ordered, part #AP2106564. Can you provide "How To" instructions for intallation?
ANSWER Sheri, The regulating thermostat 131298300 is located on the front of the blower housing 131775600. You'll need to unplug the power cord, or remove power to the unit. raise the dryer top panel, You'll need a putty knife or other flat blade tool to press in on the retainer clips that hold the top to the front panel. You'll need to find the two(2) hex head screws that attach the front panel to the cabinet side flanges and remove them.Pull the top of the front panel out towards you, enough to disconnect the wires from the door switch and drum light(if supplied). Then, lift the frot panel out and up, until it clears the drum and can be lifted off the bottom retainer clips. You now have access to the blower housing in the front left corner of the cabinet base. and can remove the two(2) hex head screws that hold the thermostat to the blower housing.
Answered by AppliancePartsPros.com | Wednesday, August 15, 2012