My icemaker is producing ice. I just cannot get it to dispense the ice. I have replaced the Interface Display Asm. (part WR55X10298). This did not help.
I can turn the auger by hand. Is the problem in the auger motor or solenoid?
Thanks for your help!
ANSWER Hello Darrin. You will need to test and see if there is power at the auger motor, with the dispenser pressed and the light switch closed. If so, and the motor does not run, you will need to replace the auger motor WR60X10259. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, August 11, 2011