I don't have any heat regardless of the cycle I am using. The vent line is clear. Could it be the thermostat or a blower wheel? Is there a heating assembly kit needed possibly?
ANSWER Hello Jason. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater WE11M23 and thermal fuses WE4M137 WE4M160 and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, August 18, 2011