My machine fills alright and drains alright but it will not agitate or spin. I have bypassed the lid switch and the inline fuse and have continuity from L1 and N to the motor. There is no power to the motor? I have replaced the main board with a new board and tried to get two other motors to spin on the floor that are not connected to the belt - they do not turn ?
Suggestions please. Thanks, John
ANSWER Hello John. Here is the issue, as you know, loss of power. The only way to locate this issue is with a meter. You will go to where you have power and then trace until you find where you are losing power at. Then replace that part to repair the unit. It could be as simple as a bad or broken wire on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, February 27, 2013