Please tell me how to install the gasket on my dishwasher. The instruction that you have enclosed with the gasket isn't too clear. The copy seems blurry.
ANSWER Hello Cheng. Disconnect the power and remove the rack from the bottom of the unit. With the door open, grasp the gasket at the top center of the door and pull straight out and remove the gasket from the door. To remove the gasket tails, you will grasp the tails and pull down toward the tub of the unit. Next, you will remove the two screws at the bottom of the door. This will allow the door liner to flex just enough to use your fingers and locate the track on the back of the liner. Unroll the new gasket WD08X10016 and locate the notch in the center of the gasket. Match the notch to the center rib on the top of the dishwasher door. Press gasket firmly into the track of the door and make sure the bottom of the gasket is seated properly into the track at the bottom of the door. You will need to raise the inner panel to place the gasket into the track at the bottom. Reinstall the two bottom door screws and the lower rack assembly. Turn power back on. Hope this helps.
Answered by AppliancePartsPros.com | Wednesday, January 25, 2012