I have checked for continuity in each fuse, no continuity in this inlet control thermis, replaced it with a new one and no continuity with the new one either. This sucks...Help!
ANSWER Hello Greg. The thermistor should not show continuity, but should show resistance in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, September 05, 2012