When spray arm goes around makes a clanging noise, sounds like two dishes banging aganist each other. replaced lock nut system and fixed for awhile now doing it again, will replace again but why does it keep breaking ears off nut?
ANSWER Dennis, A couple of things you need to check, Make sure the main conduit , is properly secured to the tub. Make sure there are no articles hanging out the bottom of the rack when rolling the lower rack in and out of the unit. and check to insure the lower spray arm and flter are installed properly " To Remove Lower Arm and Fine Filter Assembly : 1. Remove lower rack from dishwasher. 2. Gently lift and rotate lower spray arm counterclockwise to remove. 3. Rotate nut hub counterclockwise to remove. Gently lift fine filter assembly up. Remove fine filter drain from sump. 4. Clean fine filter screen if soil is present. 5. To reinstall fine filter and lower spray arm reverse procedure.
NOTE: When installing fine filter make sure the drain port of the filter is engaged with the drain for the fine filter." Thanks
Answered by AppliancePartsPros.com | Saturday, July 21, 2012