I previously asked a question about my refriderator about why the interface control manual had only been periodically working and finally stopped working and did not light up any more. I got an answer back which is still showing on your question and answer section for the interface control panel. I did check the wiring and found nothing that appeared to be wrong. So, it was suggested that the panel was bad and I ordered and installed a new one. However, when installed that panel did not work and did not light up. I called back and spoke to a very nice lady named Shae and she spoke to a tech. The decison was that it was likely the main control panel. A main control panel was ordered yesterday, 6/13, and it arrived today. I installed that panel according to the instructions provided and the interface control panel still does not work. Do you have any other suggestions. Thanks again.
If the 2 control boards did not resolve the issue then the only other thing that could be wrong with unit would be bad wiring. You will need to test continuity for the wires in the door and to the main control board from the connector at the bottom. If the wiring all has continuity then the harness at the bottom of the door is the issue.
Answered by AppliancePartsPros.com | Friday, June 14, 2013