So I go through all the error codes and get E00 (no error) not until I get to t 07 where the motor should start do I see anything that doesn't look right. the motor doesn't start. I replaced the main power board because I can hear a relay click when I push the start button. Still no turning. I dont think its the door switch because the light comes on when you open it. Do you think it could be the motor or one of the limit switches?
Thanks
Mark B for Model Number DBVH512EF0WW
ANSWER Hello Mark. Test for power going to the motor. If there is power there, and the motor does not run, you will need to replace the motor in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Saturday, November 17, 2012