if set at 350 will heat to 150 then gas goes off, replaced temp sensor, igniter glow orange stumped.
ANSWER Hello Richard,
You want to check your ignitor to ensure that you are getting between 2.5 and 3.0 amp draw. If you are not getting this amp draw then you would want to replace the ignitor WB2X9154. If there is proper amp draw then you would want to replace the gas valve WB21K5009. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, November 26, 2012