From your earlier answer to unclog the unit,how do I remove the lower spray arm and what is a t60p screen cover filter you mentioned or is that a misspelling.If so,what is the part no. and where is it located. Thank you
ANSWER Ed, you will need to remove the dishwasher from the cabinet, remove the pump assembly from the sump and the pump connect assemblies and the extract and install the new pump connector through the tub opening. There are two(2) filters in the unit WD12X417 the sump cover filter and underneath that, is the sump cap/filter WD12X418. You remove the two screws from the cover and lift both components out of the sump. Here's the basic information for removing the lower spray arm assembly," WASH ARM SERVICE AND DISASSEMBLY: 1. Check spray arm holes for bits of china, seeds and other foreign matter. 2. Check spray arm rotation.
3. Remove nut tower, LEFT HAND THREADS- by using a screwdriverblade. 4. Lift out Power Tower assembly and Nut Tower.
5. Remove 1(4" hex head screw from the center of the wash arm to release arm. 6. Spray arm hub and entire spray arm assembly
can be removed by turning spray arm hub (right hand threads) and removing. 7. Reverse to reassemble." Thanks and Good Luck
Answered by AppliancePartsPros.com | Monday, December 05, 2011