This is the correct model number for my previous question....Pump leaks water when running. Will the impeller kit fix the problem? THANKS
Bryan for Model Number GSD3600G00CC
ANSWER Bryan, We're going to presume the pump leak is between the outer pump housing and the motor, in which case, Yes, the impeller / pump seal kit WD19X10032 will solve the issue. " Once you remove the motor and sump assembly from the dishwasher, its a matter of unscrewing the chopper blade, grate, ring etc. Then separate the sump housing from the motor and press the... more shaft seal out of the housing. Here's some help " Hold motor shaft, remove old cutter.Remove the grater by rotating clockwise. Remove wear ring and wear ring retainer. Hold the motor shaft and remove the old impeller by turning clockwise. Separate motor from pump by removing four(4) screws. Remove protective sleeve from the motor shaft if present, and discard. Press seal out of the pump housing from motor side of pump and discard. Install new seal assembly by pressing seal firmly in pump housing seal pocket. Make sure seal is completely seated in the pump housing pocket." Thanks
Answered by AppliancePartsPros.com | Monday, October 29, 2012