Per your previous answer, I removed lower spray arm assembly. How do I remove old Service dome from the tub? Is it screwed in to the tub/body? Appreciate your help.
ANSWER Hello Shah. If necessary, the sump can be accessed without
removing the push on nuts by carefully lifting up
at the back edge of the filter assembly. Use care
when reaching around or through the coarse filter
as the sump opening in the filter can have a
sharp edge. Never lift the filter greater than 45°
without first removing the push-on nuts. If the posts break from the bottom of the tub, a
repair kit, WD22X10023 can be used. The kit
consists of a molded plastic base, which after
removing the lower spray arm will fit over the
raised center portion of the tub and hold down the
filter. Screwing the spray arm down over the
molded base holds it in place.
Answered by AppliancePartsPros.com | Saturday, February 23, 2013