My dryer runs but does not get hot. Could this be the problem?
ANSWER Hello Pete. Yes, if the terminal block WE4X716 is burnt, it will cause the dryer not to heat. If it is good, check for 240 volts and that the unit is not on air fluff. If it is good, you will test the heater WE14X10015 and the thermostats WE4X757 WE25X10011. They should read closed for continuity. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, September 08, 2011