General electric dryer. Will not start up and run. I checked the breaker first. Good. Then I ohm the start switch. Tested good. Then ohm the door switch. Tested good. What else could this problem occure from? Any one have any ideal? Thanks for the help.
ANSWER Hello Lee. You will need to check and see if the limit switch WE25X10011 is bad in the unit. It should read closed for continuity. If open, you will need to replace the limit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, May 22, 2012