Our gas burners on top work, but the oven and broiler will not come on. We checked the shut off in bottom drawer and it appears to be open - What do we need to replace?
ANSWER Hi Melody. Check the oven sensor part # WB21X5301 for 1100ohms. If it is open then it will not allow the controls to work. Are there any fault codes showing? Can you command bake and broil temperature ranges as the clock works well? Is the clock fully lit up ? Make sure you have 120 vac on the red wire at the K-1 Broil relay and the K-2 Bake relay. GE GAS (ROUND) IGNITER / VALVE ; Test for 2.6-3.0 volts AC at the gas safety valve with the igniter turned on. If the voltage is there, you have a bad safety valve. Part # WB19K10051. If the voltage is low, you have a weak igniter and the igniter will need to be replaced. You can use a ohm meter part # TJMA-DM1 to aid you in this. You will read between 50 - 250 ohms on a cold igniter. Thank You.
Answered by AppliancePartsPros.com | Friday, September 28, 2012