GE Dishwasher 1 1/2 years old. Water does not pump out of bottom of unit. Drain & hoses have been checked & are clear.
When cycle gets to point that it should pump out, we hear a humm & clicking from control panel. Can't tell if pump is attempting to activate.
ANSWER Hello Ray. You will need to test and see if there is power coming to the pump when the unit is in drain mode. If so, and the pump just hums, you will need to replace the pump assembly WD26X10043. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps.http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, July 07, 2011