Dishwasher runs but does not fill with water.
You will want to check to make sure that the float on the left front of tub is not stuck in the up position. Also check to make sure that the float switch is good. If the switch is reading open when pushed in the the switch is bad and needs to be replaced. If this checks ok then check for 120 vac to the water valve when unit is calling for water. If there is not 120 vac then check at the timer for 120 vac on the water circuit. This circuit can be found on the wiring diagram. If it is sending 120 vac but water valve is not getting 120 vac then you would have a faulty wire. If you get 120 vac to the valve and no water then the water valve WD15X10003 would need to be replaced. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Wednesday, February 27, 2013