Note: This question is for the older version of this part, but we thought you might still find it helpful
Dryer is not drying. Just replaced the heater assembly. With new thermostat and other sensor I forget it's name. But everything is spinning and it's blowing air out the back. I'm lost. What can this be?
ANSWER Hello Chayse. Check and make sure you have 240 volts coming to the dryer. Check and make sure the unit is not set to Air Fluff. Also check the heater and thermostats and see if they are good. You can test these with a multi-meter TJMA-DM1. They should read closed for continuity. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Monday, July 23, 2012