I have an error code er/dh the heater is not coming on. Is there a fuse in between the main board and the heater? I tryed jumping the heater out and there is no power to the plug.
ANSWER Hello Sal. No, there is no fuse. Just sensors and the heater. If there is no power out of the board, you will need to replace the control board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. Hope this helps. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, February 09, 2012