What does P.T.C stand for and what does it do?
ANSWER Positive Temperature CoefficientThis device utilizes a ceramic element with a predictable thermal response to the introduction of electric current. As current is introduced across the start windings, the PTC element begins to warm. When the PTC device reaches approximately 250o F (corresponding to 0.6-0.8 seconds), the resistance in the element increases and creates an open switch that releases the start winding from the circuit. The 0.6-0.8 seconds that the PTC device allows the start windings to be engaged is generally enough time to enable the compressor to start. The advantage of this device is its simplicity. A two-wire connection between the run and start terminals on the compressor is all that is required to provide reliable starts in most cases.
However, this device has several limitations that should be considered if the application is critical.
· The PTC device has no ability to sense whether the compressor has actually started.
· The amount of time provided for a start boost is dictated solely by the temperature of the ceramic device, which has warmed due to the introduction of the starting current.
· If the compressor does not start before the temperature threshold has been reached, it will not start until the PTC device cycles through a cool-down period (usually 2 - 3 minutes). Many view this start approach as an appropriate safety measure. The PTC effectively limits the continued unsuccessful cycling of the start windings that can often result in a motor burnout. Others will argue that a start device should be able to re-cycle immediately. If this feature is desired, a PTC is not the correct start device application.
Answered by AppliancePartsPros.com | Tuesday, October 09, 2012