I have already replaced the PCB sensor assembly but can not get the compressor to run.
When turning it on the fan runs for a few minutes and then shuts down. I can bypass the ry-comp relay and get the compressor to run but not the fan. What am I missing?
ANSWER Hello Mark. Test for power to the compressor. If none is there, replace the main PCB in the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Friday, June 29, 2012