When I press the On button the nothing happens the panel stays dark (no lights). I have checked the power and there is 120v going to the main board. The washer had a bad spider and after replacing it and the bearings it will not power up. I have also checked all the connectors and they are tight. Could this be the the problem or the Main board. What can I check to tell?
ANSWER Hello Wayne. You will need to check and make sure you connected all the wires going from the pwb 6871EC2041A to the main control board 6871EC1118A. If so, and the unit does not work, it sounds like the PWB will need to be replaced.
Answered by AppliancePartsPros.com | Thursday, June 07, 2012