Compressor does not run,everything checks out no power to compressor ......Will a bad sensor cause the mother board to not let power to the compressor or a bad mother board????
ANSWER Hello Paul. Yes, a sensor can, but usually in a case like this it leads to the main PCB 6871JB1410P on the unit. You can test the thermistors on the unit and if they are good, replace the board. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Thursday, December 20, 2012