Washer stops after rinse cycle, pumps water out of washer, but will not begin spin cycle. Time left on rinse and spin cycle usually around 13. An OE message occurs after some time. Checked for clogged filter and bent hose, both ok. What else could be the problem?
ANSWER Hello Greg. Test for power to the pump motor. If there is power there, and the pump does not run, you will need to order and replace the pump on the unit. You can test this with a multi-meter TJMA-DMT3. Here is a link on how to use a multi-meter. http://forum.appliancepartspros.com/oven-repair-including-ranges-cooktops/4810-how-check-continuity-ohmmeter.html
Answered by AppliancePartsPros.com | Tuesday, June 25, 2013