The ice maker no longer "clicks on" and adds water to the ice cube mechanism? The water works and I can manually put ice in the dispenser and it works. It just doesn't make its own ice? Is this the Solenoid, Reversin, Valve ?
ANSWER Hi Gord. Make sure the fill tube to the ice maker is not frozen. Have you tried to toggle the I/M switch on and off again ? Ice maker part # AEQ36756901. Is the bottom paddle stuck in the in position or bent ? Feel the ejector blades to see if there is a stuck cube in the tray. It will block the cycle. Is the temperature around 0° and not colder? Check with a thermometer in the middle of the freezer . I would use a volt/ohm meter part # TJMA-DM1 to assist. you in your diagnosis. Place the ice maker part # in a forced fill. Have your meter already placed in the water valve connector to see if the water valve will get the 7 seconds of water fill voltage... TEST MODE
Press and hold the cube size button for more than three seconds to put the ice maker into test mode. The test cycle can be used to diagnose ice maker issues and to clean it. Is there any green led lights on in the ice maker indicator lights ? Let us know how they are configured ? Are there any codes showing at the fountain control ? Thank You.
Answered by AppliancePartsPros.com | Tuesday, April 10, 2012